2006 VERMEER BC 2000 XL Brush & Wood Chipper Yellow Exterior *CATERPILLER 3126 270 HP TURBOCHARGED ENGINE! SER# BEJ12734 *Only 2,246 Hours !! *GVWR 16,000 LBS !! Tires: 235/75/R 17.5 Rims: 17.5 x 6.75 SERIAL # 1VRY1520861000244 The Vermeer BC2000XL brush chipper handles high-volume organic chipping projects with ease. With three Caterpillar Tier II engine options, this drum-style chipper is big enough to tackle some of the toughest land-clearing jobs. Dual spring-tensioned feed rollers feature a unique vertical design adjusting to handle unusual bends and twists in brush material and adapting in size to handle limbs up to 20 (51 cm) in diameter. The patented feed roller slide system massages the log into the chipper and helps prevent the sudden uplifting of logs. Lifting large loads is fast and easy with an optional heavy-duty loader capable of lifting up to 3000 lb (1360 kg) and rotating 220 degrees around the machine. This loader is controlled by two joysticks located at the protected control station which swings out at a 45 degree angle to improve visibility of the infeed area. From the brush chipper market leader comes the latest technological advancement to improve operator safety the Bottom Feed Stop Bar. This patent applied for system can be activated without an intentional action by the operator, a distinct advantage over comparative systems that require the operator to react, pull or push something in order to stop the infeed mechanism. The system offers two sensitivity settings to assist in difficult chipping conditions. BC2000 XL Specifications: General Weight (with loader): 14,800 lb (6713 kg) Weight (without loader): 12,000 lb (5443 kg) Length: 172 (437 cm) Height: 130 (330 cm) with loader, 111 (282 cm) without loader Extendable tongue: 24 (61 cm) Tires: 235 x 75R 17.5 Load Range J Axles/suspension: 7000 lb or 8000 lb (3175 kg or 3629 kg) tandem torsion axle Clam: 345 or continuous rotator options Engine Options Make/Model: CAT 3126B Max. gross horsepower: 250 hp (186 kw) @ 2500 RPM Electrical system: 12-volt Fuel capacity: 65 gal (246 L) Optional Features Loader Stabilizers Winch Hydraulic chute (rotator or reflector) Vandal package Cutting System Drum system: Belt Speed: 1100 RPM @ no-load high idle Drum size: 36 dia. x 26.5 wide (91 cm x 67 cm) Knives: Four with pockets located every 90 Drum lock: Four-position Feed/Discharge System Number of feed rollers: 2 Chipping capacity: 20 (51 cm) Max. Feed roller height: 24 (61 cm) Number of knives: 11/feed roller Discharge height: 106 (269 cm) Discharge chute rotation: 270